Growers Domain
IPM
Vivosun
Vivosun
SNS DC Disease & Fungal Control by Sierra Natural Science
Sierra Natural Science
SNS DC Disease & Fungal Control

SNS-DC All Natural Disease & Fungal Control works in several ways to heal and protect your plants:

  • The water soluble formula is absorbed into the plant cells, where it forms a protective barrier that repels and kills molds, mildew, bacteria and fungus.
  • The presence of SNS-DC in the cell walls also serves as a natural preservative, keeping the harmful microbes from decomposing these walls.
  • Once inside the plant, SNS-DC will displace salt and sequester those metals that microbes need to grow and colonize.
  • The dehydrating agent and oxidative action found in SNS-DC cause the cell walls of the microbes to dehydrate and break down, which kills the unwanted pests.

Foliar application of any control substances is always at the mercy of the elements. Wind, rain and sunlight can cause degradation and dilution to these products. Since SNS-DC works inside the plant itself and is not exposed to the elements, as other foliar sprays are, you will not have these concerns and can expect long term and continuous control. As SNS-DC courses through the plant keeping damaging microbes away, the natural preservatives actively work in a healing capacity. So SNS-DC is not just fighting off damage, it is helping to heal and prevent further damage.

Additional benefits of this product include:

  • No Restricted Entry (0-hr REI)
  • Can be used repeatedly without building up toxicities or causing other problems for your plants
  • Non-staining and has no odor

SNS-DC can be used on crops, gardens, flower beds, in greenhouses, and in and around homes.

 

This Product Controls These Pests or Diseases: Black mold , Powdery Mildew and Rust .

 

 

Warning & Toxicities: KEEP OUT OF REACH OF CHILDREN. Not for human consumption. Avoid contact with eyes and skin. Use eye protection, chemical rated gloves and a long sleeve shirt.

Active Ingredients/Guaranteed Analysis:

Ready to Use
Active Ingredients
Citric Acid............................ 0.05%
Other Ingredients
L-Ascorbic Acid (vitamin C), Sodium Sulfate, Potassium Sorbate, Quillaja Saponaria (Soap Bark) & Purified Water....99.95%

Total ........................................ 100%

Concentrate
Active Ingredients
Citric Acid................................ 1.5%
Other Ingredients
Vitamin C (L-Ascorbic Acid), Sodium Sulfate, Potassium Sorbate, Soapbark (Quillaja Saponin) & Water.....98.5%
Total ................................................ 100%

 

Specifications
Categories
Fungicide
Product Details
Recommended Usage
1%/L
Citric Acid
0.05%
  • SNS DC Disease & Fungal Control Product Label (Concentrate)
  • SNS DC Disease & Fungal Control Product Label (RTU)
  • SNS DC Disease & Fungal Control Application Sheet (RTU +Conc)
  • SNS DC Disease & Fungal Control Organic Cert
  • SNS DC Disease & Fungal Control SDS (Concentrate)
Use & Instructions

GENERAL INSTRUCTIONS -

Shake well before using and always test on a small area first.

  • Fill the spray tank to at least half the desired amount of clean water and commence agitation. Add the required amount of SNS-SC directly to the water (Do not make a slurry or paste prior to adding to the tank) and complete filling to the final volume. Continue agitation.
  • For best results, use warm (70° F) distilled or chlorine-free water or water with the least amount of salts in it.
  • Multiple applications may be necessary due to the severity of the disease.
  • SNS-DC may be used as a maintenance pre-emergent disease control.
  • After application, allow to dry, then culture test for disease.
  • No Restricted Entry Interval (0-hr REI)
  • Product will start working a few days after application and will continue to work for up to 1 week.
  • Be careful when contacting flowers as excess moisture may have unwanted results.

 

RTU APPLICATION -

Plant site use for all plants and turf (leaves, foliage, stems, stalks, fruit and around flowers).

  • Coverage = 1 gallon of SNS-DC RTU solution will cover approximately 550 sq. ft. One quart will cover approximately 137.50 sq. ft.
  • Spray all plant parts (leaves, stems, stalks, crowns, etc.).
  • Spraying lightly on top of the soil may be helpful in reducing unwanted yeast and molds.
  • Be careful when contacting flowers as excess moisture may have unwanted effects.
  • Always spray in the cooler part of the day or when grow lights are off.

 

FOR CONCENTRATED FORMULA AS A SOIL DRENCH -

For use on potted plants and in greenhouses:

  • Mix 1 oz. (2 tbsp. or 28 ml.) of SNS-DC Concentrate to 1 gallon (3.79L) of water.
  • Product will start working in about 1-3 days about application to start working and will continue to work for up to 1 week.
  • Reapply every 5-7 days as needed.

For use on bedded plants, turf and agricultural fields:

  • Mix well 1.3 oz. (2.6 tbsp. or 38 ml.) of product to 1 gallon (3.79L) of water.
  • Mix well 64 oz. of product per 50 gallons of water per acre minimum.
  • Mixed solution may be stored for 1 week or used immediately.

 

FOR CONCENTRATED FORMULA AS A FOLIAR SPRAY AND IN SPRAYING/FOGGING -

Always spray in the cooler part of the day or with grow lights off. Be sure to maintain agitation during mixing and application to assure uniform product suspension. Thorough coverage of all foliage is essential for efficacy. To achieve good coverage, use proper spray pressure, accurate application rates and appropriate spray equipment with sufficient water.

  • Potted plants: 1 gallon of mixed solution will cover approximately 550 sq. ft.
  • Bedded plants & agricultural fields: I gallon of mixed solution will cover approximately 500-900 sq. ft. dependent on sprayer droplet size requirements.
  • Spray all plant parts - leaves, stems, stalks, crowns, etc.
  • Spraying lightly on top of the soil may be helpful in reducing unwanted yeast and molds.
  • It takes about 1-2 days after applying to start working and will continue to work for up to 1 week.
  • Reapply as needed.

COMPATIBILITY -

This product has been designed to be compatible with various other plant protection products. However, do not mix with oils, oxidizers or bicarbonates. SNS-DC should be mixed with water in the tank before adding any other components. Agitation should be constant prior to and during application. We highly recommend doing a jar test prior to mixing with other chemicals.

 

 

Storage: Store in a cool, dry area away from heat or open flames. Do not reuse container. Dispose in trsh or offer for recycling if available.

Diseases & Pests Controlled
  • Black Mold
  • Powdery Mildew
  • Rust
Reviews (0 reviews)
  • No Reviews yet.
    Be the first to leave a review for this product.